Escient FireBall H-40 Remote control Manual de usuario descargar pdf (Pagina 94)

TheaterTouch Designer

IR ROUTING TAB (ALL DEVICES COMMUNICATING WITH AN RP6)

The IR Routing Tab allows IR commands to be addressed to specific IR output ports of the RP6 control processor

and to be issued conditionally with the use of power sensing modules. This provides a method of discrete control

for identical components and proper power management of components with toggle power commands.

OUTPUT PORTS

1. Select the output ports on the control system for the IR of the

selected button.

2. Selecting exactly one numbered IR port enables the use of

power sensing modules to conditionally issue a command on

the selected button.

3. Choose "Always" to have the command issued regardless of a

condition. This option should also be checked if no power sen

sor is connected to the selected IR output.

4. Choose "Only if the device is ON" to issue the command if a

power sensing module senses that a component is on.

5. Choose "Only if the device is OFF" to issue the command if a

power sensing module senses that a component is off.

6. Choose OK to confirm the new settings.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 144 145

Sin comentarios

Escient FireBall H-40 Remote control Manual de usuario Pagina 94