Escient FireBall H-40 Remote control Manual de usuario descargar pdf (Pagina 119)

119

USING THE MACRO EDITOR - Continued

Report command – Select this button to place a listing of all steps in the current macro in your web browser, in a

format suitable for printing.

Trash Can – Drag and drop steps from the macro into the wastebasket to delete them.

The Command from Library

macro step type causes the macro

to output an Infrared command. Infrared commands are added

by dragging the desired function(s) from the IR Command list

to the macro display on the left side of the Macro Editor. You

can use the "Select New Remote" button to change remotes,

and use more than one remote in a macro. If you do not have

access to the Command Library with the desired function, but it

is assigned to a button in the current device, use the Command

from Page option to add it to the macro.

The Command from Page macro

step type causes the macro to

output an Infrared command. The command is taken from a but

ton in the current device. Select the page containing the desired

command, and then drag it from the "Available Buttons" list to

the macro.

This should be used for maintaining devices for which the

Command Library is not available. If the desired command is in

a Command Library, use the Command from Library option.

(System Control Processor

must be present) The RS-

232 Command macro step type causes the macro to output an

RS-232 command, using the control processor and an RS-232

output cable (CM-232 Module). The RS-232 parameters (baud

rate, parity, data bits, and stop bits), output port, and the RS-232

control string can all be customized using the available controls.

You can switch between editing in HEX mode and text mode

by clicking the "Hex Edit Mode" button. After you have set the

desired parameters and entered the command string, drag the

RS-232 icon from the lower right to the macro display on the

left. Release the mouse button at the location where you would

like to add the RS-232 step.

Chapter 8. Working with Macros

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 144 145

Sin comentarios

Escient FireBall H-40 Remote control Manual de usuario Pagina 119