Escient FireBall H-40 Remote control Manual de usuario descargar pdf (Pagina 24)

TheaterTouch Designer

EDITING DEVICE PROPERTIES

1. Choose Properties from the Device menu to change settings that affect the currently selected Device.

2. Select each of the tabs in the Device Properties dialog box to edit the individual device properties.

Note: Many of these properties can be accessed directly on touchscreen remote devices through their respec

tive Control Panels, however it should be noted that changes made locally on a remote will be over-written upon

programming it with the TheaterTouch Software.

K4 GENERAL TAB

IGNORE FIRST PRESS FROM POWER DOWN

MODE

1. Enabling this option causes the device to ignore the

first button press if the unit is powered down (the

backlight is off.) The first button press will wake up

the device and turn on the backlight, but will not acti

vate any programmed command or macro.

ENABLE IR RECEIVER

2. Enabling this option allows signals received by the

built-in IR receiver to be passed through to the IR

output.

POWER DOWN TIME

3. Adjust the amount of time the unit stays awake after

the last button press of the touchscreen. The time is

variable from 1 second to 60 seconds (default is 10

seconds).

VIDEO INPUT STANDARD

4. Select the type of Video Input Standard that will be

used for all of the video feeds

NTSC = USA/Canada

PAL = Europe/Asia/Australia

5. Choose OK to confirm the new settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 144 145

Sin comentarios

Escient FireBall H-40 Remote control Manual de usuario Pagina 24