Escient FireBall H-40 Remote control Manual de usuario descargar pdf (Pagina 32)

TheaterTouch Designer

RK3 BACKLIGHT TAB

ENABLE AMBIENT LIGHT SENSOR

1. Check this box to enable a built-in light sensor to

determine the current room lighting conditions and

change the backlight levels according to these con

ditions and the current activity status of the control

device.

BACKLIGHT LEVELS

2. Use these sliders to adjust the backlight setting for

normal lighting conditions and dark lighting condi

tions when the Ambient Light Sensor is enabled for

both Active and Idle status.

Active Status = Device is in use

Idle Status = Power Down Time has expired

(set on the "General" tab

)

BACKLIGHT LEVEL (ACTIVE)

3. Use this slider to adjust the backlight setting for

when the Ambient Light Sensor is disabled and the

control device status is Active.

BACKLIGHT LEVEL (IDLE)

3. Use this slider to adjust the backlight setting for

when the Ambient Light Sensor is disabled and the

control device status is Idle.

4. Choose OK to confirm the new settings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 144 145

Sin comentarios

Escient FireBall H-40 Remote control Manual de usuario Pagina 32