Escient FireBall H-40 Remote control Manual de usuario descargar pdf (Pagina 39)

Chapter 4. Working with Devices

T4 GENERAL TAB

ENABLE TILT SWITCH

1. Enabling the Tilt Switch allows the internal tilt switch to turn on the display and button backlight when the

remote control is handled. This option is enabled by default.

DISABLE KEYPAD BACKLIGHTS

2. Check this box to turn off the backlight on the hard buttons.

IGNORE FIRST PRESS FROM POWER DOWN MODE

3. Enabling this option causes the device to ignore the first button press if the unit is powered down (the back-

light is off.) The first button press will wake up the device and turn on the backlight, but will not activate any

programmed command or macro.

POWER DOWN TIME

4. Adjust the amount of time the unit stays awake after the last button press of the touchscreen. The time

is variable from 1 second to 60 seconds (default is 10 seconds).

VIDEO INPUT STANDARD

5. Select the type of Video Input Standard that will be used for all of the video feeds

NTSC = USA/Canada

PAL = Europe/Asia/Australia

LOW BATTERY WARNING TIME

6. Set the low battery warning time to determine

when the low battery icon appears on the LCD

screen. Choose one of the three available times,

Normal (default time), Short or Long.

IR OUTPUT DESTINATION

7. Select how infrared codes should be delivered from

the T4

Internal LED - sends IR directly from the T4

Hardwire (Requires EM4) - IR is sent hard

wired through the EM4 expansion module

8. Choose OK to confirm the new settings.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 144 145

Sin comentarios

Escient FireBall H-40 Remote control Manual de usuario Pagina 39