Escient Vision VX Guía de instalación descargar pdf (Pagina 7)

Escient Vision VX-600 Installation Guide

Version: M51003-06A1

Getting Started

UsetheinformationinthischaptertosetupandcongureyourVisionsystem.

To get started you need to:

1. ProperlycongureoneormoreVisionVSorVCclientsonyourEthernetnet-

work.

2. ConnectVisiontoyourEthernetnetwork

Important: Read all of the following installation instructions and the safety

information in the included carefully before you plug Vision into a power outlet.

Setting up VX

Rackmounting the Server

The Vision VX ships with two rackmount brackets and four

nuts. If you wish to mount your VX server in a rack, attach

the two rackmount brackets to the front sides of the VX

chassis. Make sure that your rack has plenty of airow on

all sides of the VX chassis to prevent overheating.

Step 1: Connect the Ethernet cable

ConnectaCAT6ratedEthernetcablefromyourgigabitEthernetswitchtotheEther-

net port on the back of Vision VX Server.

Step 2: Connect the power cord

Plug one end of the power cord into the back of Vision VX Server and the other end

into a power outlet.

Note: Escient recommends the use of a UPS (uninterruptable power supply)

with surge suppression for all Vision products.

Step 3: Inspect the 4 drive trays

Make sure that all 4 1TB drives are fully inserted and the silver eject tabs are secured.

Step 4: Turn on your Vision

SetthepowerswitchonthebackpaneloftheVXtotheONpositionthenpressand

releasethepowerbuttononthefrontpanel.TheLEDsonthefrontpanelwilllight

and the Vision will begin to start up. The VX is fully setup when:

• TheGreenPowerLEDissolid

• TheGreenLANindicatorisashing

• All4DiscStatusLEDsaresolidgreen

• TheSystemStatusLEDissolidgreen.YouwillhearashortbeepfromtheVX

when the boot sequence is complete.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Sin comentarios

Escient Vision VX Guía de instalación Pagina 7